A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal amadeya42

on this site
current topics
topic 58050

Powder coating finishes: textured, structured, plain

December 1, 2011

Dear All,
As per my understanding from our powder coating supplier,
we can get three types of finish 1: Texture; 2: Structure; 3: Plain

What is the difference between these three finishes?
How to define or select this type of finish for my requirement?
What is the advantage or disadvantage of these three?

Kannan Boopathi
- Salem, Tamilnadu, India

December 2, 2011

Hi, Kannan.

Plain and textured are pretty much self explanatory. "Structured" seems to be a relatively new word in the powder coating industry, used to describe coatings that are more of a "hammertone" look than textured. Of course, all words tend to mean fairly little out of context. I think you would need to look at paint chips which the supplier represents as "structured" to have a clear mutual understanding. As for advantages and disadvantages, I'm sure it's 90% appearance. Good luck.


Ted Mooney, amadeya42.com
Teds signature
Ted Mooney, P.E.
Pine Beach, New Jersey

January 3, 2012

The first thing to consider in choosing a PC finish is-- are my requirements decorative or functional. If functional then what is the purpose of the coating? I would choose epoxy based powder for chemical resistance or very low gloss finishes. For exterior weather resistance-- a polyester based powder would be my first choice or Acrylic if available. For internal decorative purposes, epoxy polyester powders will meet your requirements.
Having chosen the resin system to meet the demands of the surrounding environment the choice of aesthetic value to add to the visual experience can now be considered. I would suggest that your powder supplier can offer more special effects than the three you mention. Here is a list. Your supplier may have more or less special effects than those listed.
3)Texture, fine heavy.
4)Metallic, must be over coated if destined for exterior
destination or refurbishing of alloy wheels.
7)Wrinkle, fine coarse.
8)Wood Grain effect.
9)Marble effect.
10)Crocodile. I have not seen this around for many years. The effect was almost similar to a crackle finish but with raised geometrical square peaks with narrow troughs-- rightly named Crocodile finish.
If you are unfamiliar with any of the above-- I am sure Google will supply an answer.

Terry Hickling
Birmingham, United Kingdom

January 6, 2018

Q. What is the difference between structure finish & texture finish in powder coating?

soma shekar
- Bangalore, karnataka, India

January 2018

A. Hi Soma. That was already answered. The problem remains that we cannot put a fine point on slang or casually used terms. You & I could get together and look at two finishes and call one "structured" and the other "textured", but in a world of 7-1/2 billion people there is no rule or law that prevents two other people from getting together, looking at the same parts, and assigning the opposite labels to them. Paint chips showing what you want and what you don't want are probably the only way to go.


pic of Ted Mooney
Ted Mooney, P.E. RET
Pine Beach, New Jersey
Striving to live "Aloha"

This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site


Disclaimer: It's not possible to diagnose a amadeya42 problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices

©1995-2018 amadeya42.com, Inc., Pine Beach, NJ - -