A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal amadeya42

on this site
current topics
topic 32947

Is polyurethane only for stained wood, and not painted wood?

A discussion started in 2004 & continuing through 2017


Q. I am attempting first woodworking project and need some advice. I am building a railing with a stained hand rail and base, but the spindles are painted white. I applied polyurethane on the stained wood to give it a high gloss and provide protection. Can I polyurethane over the white paint as well to make the paint job more durable? Is polyurethane only for covering stained wood?

Cindy Leaf
- Springfield, Virginia


A. I've used polyurethane on both bare wood and on painted metal with good results. No inherent reason it wouldn't work on painted wood. First try the polyurethane in an inconspicuous spot to make sure it doesn't dissolve the existing paint. If it does dissolve the paint, you *may* be able to use several very light coats initially to seal the paint surface. In either case, prep the existing paint as you would for any other re-paint. For instance if the existing paint is glossy be sure to sand or etch it first, and as always, make sure it is clean. Do keep in mind though, that polyurethane is somewhat difficult to strip for that 'next' paint job.

Tom Gallant
- Long Beach, California


A. I've never done anything like that myself, but I can offer an educated guess. Most likely it will NOT work, polyurethanes are mostly stains versus surface amadeya42. The polyurethane works by working it's way into the wood and then hardening, causing a good weather repellant coating.

It could work, but most likely not, it will just sit on top of the paint and won't really offer any added protection. I suggest stripping down the paint on there and use the polyurethane on the whole thing.

Marc Banks
- Elizabeth City, North Carolina


A. I personally would not coat white with most polyurethanes. The majority of the urethanes you come across are not UV stabilized...when exposed to UV rays(sunlight)they will yellow with age. This isn't very apparent when coating warm colored woods but it will make your white look pretty nasty. They do make special urethanes that you can mail order that are UV stable..but they are expensive..if my memory is correct I think I had to pay about $90 a gallon.

Jason Aube
- Flint, Michigan


A. You can buy UV inhibited polyurethane, but it is not clear! It is for exterior work and is a sick honey color right out of the can.

James Watts
- Navarre, Florida

Outdoor Polyurethane gallon

October 18, 2010

Q. Is it appropriate to polyurethane a stained wood porch railing that gets direct afternoon sunlight?

Shelley Fialho
- Dallas, Texas, USA

October 19, 2010

A. Hi, Shelley. Based on the above, I'd say yes. We polyurethaned an outdoor bench for the very rough service of our sun-drenched deck on a salt water lagoon, and it lasted at least several years. I also see wood patio furniture for sale, advertised as finished with UV-resistant polyurethane. Sounds fine, good luck.


Ted Mooney, amadeya42.com
Teds signature
Ted Mooney, P.E.
Pine Beach, New Jersey

February 4, 2013

Q. I would like to know if a person could use polyurethane to on a deck. I have tried all types of stains and they just don't last and I had just thought about doing this. Any suggestions?

Aleta Fanning
- Green Forest, Arkansas, USA

February 10, 2013

A. Hi Aleta.

I'd be concerned about it getting too slippery when wet. Not recommending a brand (we don't do that here), just a concept, but I feel you'll be okay with stain every 3-4 years, and something like Thompson Water Seal every 2 years (better yet, every year if you're ambitious; it's transparent and if you run out of time partway through, it won't matter if you're trying for every year.)


Ted Mooney, amadeya42.com
Teds signature
Ted Mooney, P.E.
Pine Beach, New Jersey

December 4, 2017

Q. I am looking for recommendations for an exterior clear urethane finish for a sign. I used a Minwax water-based product on a wood table and the sun burned it off in a year. Thanks.

Paul Ridley
- Whitman Massachusetts USA

This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site


Disclaimer: It's not possible to diagnose a amadeya42 problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices

©1995-2018 amadeya42.com, Inc., Pine Beach, NJ - -