A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal amadeya42

on this site
current topics
topic 16429

Copper sealant to prevent oxidation and maintain appearance

Some clearcoating solutions (adv.) g j nikolas banner everbrite banner

A discussion started in 2002 but continuing through 2018


Q. At the hotel I work at we have decorative copper sheets that line most of the facing of our front desk. Being in an area that has decent humidity as well as lots of little hands touching them they are constantly being polished. We are looking for a sealant which may be applied that will prevent any further oxidation as well as maintain the true appearance of the copper.

Jason W [last name deleted for privacy by Editor]
- Branson, Missouri, United States


Q. Did you find a solution to the problem of sealing the copper? I am now facing the same issue on a surface at my home. Any suggestions would be appreciated.

Alaina D [last name deleted for privacy by Editor]
- Mooresville, North Carolina

A. Hi. brass lacquer [linked by editor to product info at Amazon] is made for exactly that purpose, and is designed to be easily removable with Acetone [linked by editor to product info at Amazon] or lacquer thinner [linked by editor to product info at Amazon] for periodic rebuffing if necessary. Lacquer specialists who support this site include G.J. Nikolas. Good luck.


Ted Mooney, amadeya42.com Teds signature
Ted Mooney, P.E.
Pine Beach, New Jersey

September 2, 2008

A. I've done a lot of copper ware and cladding over the years and a good finish has always been tough to do. I have found that a lacquer finish is best for durability and can be stripped easily to refinish. I use a brand name called Permalac, it works well for interior and exterior applications, best application method is to spray but it can be brushed. Waxing works but not in high humidity.For interior uses only you can use shellac, either by crystal form and making your own finish or buying it ready to use. Shellac has been used to seal and color metals for a very long time naturally. best of luck

Bernard Shelton
- Clarkdale, Arizona

January 17, 2011

A. I was lucky enough to go to Alchimia [jewelry school] in Italy for two weeks. To seal jewelry they said to use the clear spray for CARS. Go to a shop that sells paint for cars (do it yourself) and buy a can of the best clear spray. I have used it on green copper patina, and like the results. I think Alchimia should know what the long term results are, and they recommend the product.

Roxy Lentz
- Clarksville Indiana USA

Sealing regrained Brass Building letters

June 30, 2017

Q. I have a job at a major university with a task of regraining brass building letters not sure of what product to seal brass when done to retain shinny appearance ?

Robin Light
- Syracuse New York USA

June 2017

A. Hi Robin. I'd probably go with brass lacquer since it's made for the purpose and is relatively easy to remove if your first try doesn't go swimmingly. Good luck.


pic of Ted Mooney
Ted Mooney, P.E. RET
Pine Beach, New Jersey
Striving to live "Aloha"

January 21, 2018

Q. I have an old copper plate from USGS to make a map. I want to carefully ink the lines, then coat the entire sheet (2.5" x 4") to use as a table top. Thoughts on what would be the strongest coating I can put on it? what is the easiest way to coat such a large surface without bubbles? What if later I want to remove and resurface, is there any risk to damaging the surface with any of the lacquer or sealant removers? thanks.

D Matten
- Clifton, Virginia, USA

This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site


Disclaimer: It's not possible to diagnose a amadeya42 problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices

©1995-2018 amadeya42.com, Inc., Pine Beach, NJ - -